It's not so easy to select the appropriate type of roof truss for a house. Besides, the structure of the finished building influences the sloppiness and shape of your roof. You must consider a roof truss's aesthetic condition and functionality before purchase. Although the costs may vary, reducing the amount of expenditure is achievable.
Currently, roof trusses have replaced rafters in the market because they're more convenient, cheaper, and versatile. Let's look at the different types of roof trusses and their estimated cost to draft a perfect construction plan for your building project.
Roof trusses are lightweight materials used to create the frame of a roof, providing it with support and shape. A roof truss has 3 main parts: webbing, top chords, and bottom chords or ceiling joists.
They are used as an alternative to stick frames or rafters; because rafters are more expensive and require an expert for skillful installation on the building site. Unlike rafters, workers with little or no experience can install roof trusses. Plus, they can be installed in just a day since they can be preconstructed close to the site and erected using construction equipment.
There are different roof trusses you could use for your building project. The most common of them are:
Cathedral ceilings are also constructed using the scissor roof truss and reduces the need for a weight holding device (or beam). Horizontal lower chords are not used in constructing this roof truss; rather, only sloppy inward chords are used.
Unfortunately, this truss has a downside: insulation completion, which increases construction costs and hampers its appealing look.
This roof truss is mostly used in cathedral ceilings and is more expensive than others because it can only be braced with steel. One major disadvantage of a parallel chord roof truss is the number of wood used for its construction. Although people see the tiny lines of this roof truss as attractive and purposeful, the thermal bridging can reduce energy efficiency.
This truss is the most commonly used truss for residential building projects. The span is upto 14 meters and has a high load-carrying capacity. Its webbing is large and could hold water tanks fittingly. Most of all, they are less expensive.
This truss is constructed using a secondary chord truss held down to help minimize uplift. Akin to raised heel roof truss, this truss also generates a vapor barrier that creates great insulation. This condition causes a hike in construction costs since they'll need to purchase extra materials to side and block the ceiling and wall intersections' vapor barriers.
This truss is mostly used in areas with humid climatic conditions where mold is a common problem. However, it is more energy efficient because its raised heel reduces the occurrence of condensation that is caused by the vapor barrier it creates.
Additionally, the raised heel variant requires extra insulation work and a side soffit which increases the cost of construction. It can be constructed to cover an area and provide a spacious attic space.
Varied factors influence the cost of a roof truss. Research shows that the cost of the roof truss in an average house in New York is between $12,000 to $15,000, materials inclusive. Generally, roof truss cost lies in raw materials, so saving some bucks on the finished project isn't feasible.
For extensive analysis, the cost of labor is more than $2,500, scrap disposal is anywhere between $200 to $500, and the crane rental often exceeds $700. A good-quality lumber goes for about $10,000. A typical framing is about $60 costlier than a pre-constructed truss with more expensive materials.
Conclusion
We've compiled a list of over 5 common roof trusses. However, there are other types in the market. Whether your house roof is metal, flat, or asphalt shingles, there's a roof truss that'll fit it perfectly.
Moreover, roof trusses are cost-effective, convenient, and versatile. To find the right roof truss for your house, it's advisable to reach out to a professional roofer. Contact us at 70 Sunrise Highway #500 Valley Stream, New York 11581 (516)- 252-3001 https://www.gafroofinglongisland.com/ for the best advice on which to use.
Flat roofs are one of the best and most used roofs in both residential and commercial buildings. Its impact in recent years is worth the accolades.
Although it makes roofing easier and better due to its varied nature, it also has common problems. Some of the problems are Blistering and alligatoring. Blistering and alligatoring are some of the major problems you will encounter when using a flat roof.
Blistering is a process where there are bubbles between your roof membranes. Blistering usually occurs when air and pockets are hiding between your roof membranes. This can be an insignificant problem at first, but if neglected, it can become a major problem.
How then do you know that your blistering deserves immediate attention
Etc.
Alligatoring, as the name suggests, is derived from the name, Alligator. Alligatoring is a roof condition where there are noticeable cracks on your roof, which draws a pattern. This pattern when looked at looks like an Alligator. This is why it is called alligatoring.
To fix alligatoring problems, you need to apply a new coating. But before doing that, there are steps you should take. The following are steps you should take before, during, and after applying the coating on your roof.
These are simple processes you can apply to fix your blistering and alligatoring problems. Although if you want a professional fix, you should employ the service of a professional roofer. They can also give you recommendations you couldn't have thought of.
For more information and consultation, you can contact us at Royal Roofing and Siding Long Island, 70 Sunrise Highway #500 Valley Stream, New York 11581, 516-252-3001
Draining water is important in any kind of roof. This is to prevent problems like standing or pooling water, leaks, cracks, etc. Flat roofs, unlike other roofs, do not have the luxury and capacity to drain water by themselves.
If so, how then do flat roofs drain rainwater and precipitation? Although flat roofs are popularly known for the pooling water problem, they have a system that drains water. This system is called a drainage system.
When a flat roof is being installed, a drainage system is installed along with it so it can drain the water on your flat roof.
Most times, the reason flat roofs develop pooling water problems is that the drainage system developed a problem that affected the flow of water.
There are 3 types of drainage systems namely:
Although interior drains are usually found on large buildings, it is also used and suitable for residential buildings. It makes use of pipes and other interior systems to drain water from your roof.
The pipes are usually placed under your roof; precisely, at the center of your roof. Using this system has a high guarantee because the pipes don't break easily. Its aesthetics also serves as a good curb appeal for your building.
This is arguably one of the most used drainage systems in the flat roofing system. It is also effective for a pitched roofing system. It uses drain pipes or downspouts to divert water from your roof.
After diverting the water, it drains it through the pipes, then the pipes pass it to the ground. It is cost-effective, easy to install, and easy to use. But it has a problem: it needs regular maintenance. As mentioned earlier, one of the primary reasons for pooling water is a faulty drainage system.
Now, if gutters are not properly maintained, the pipes tend to get blocked by leaves, chunks of trees, etc, which affect the flow of water. And when the pipes are blocked, the water won't flow freely, which means the water will stay on the roof.
However, with proper maintenance, gutters are one of the most less expensive and effective drainage systems.
This is a big square opening in the outer walls that is usually along your roofing line. The openings enable the flow of water from the side of your building.
It can be installed alone or installed with drain pipes. Installing alone is usually more effective than drain pipes due to the backlogs of drain pipes. But drain pipes usually add to the aesthetics of your building. Without drain pipes, it is easy to maintain and cost-effective. But with drain pipes, you will face the same problems you have with gutters.
In conclusion, unlike other roofing systems that drain water, flat roofs drain water through drainage systems. To get more information about the best drainage system for your building, you should contact a professional local roofer in your area. Or contact Royal Roofing and siding long island at 70 Sunrise Highway #500 Valley Stream, New York 11581, 516-252-3001
It’s much easier to get confused when selecting the right roofing material for your flat roof. But by understanding everything there is to know about the nature of the material, the pros, and the cons, it will be much effortless for you to make the best decision.
TPO has become one of the famous flat roofing materials, thanks to its numerous benefits. However, as nothing is ever perfect, TPO has some drawbacks. When it’s time to replace your flat roof, what is the best flat roofing material to go for? Is TPO really the best material for your home?
Thermoplastic Polyolefin, or TPO for short, is a unique single-ply roofing membrane that comprises a mixture of plastic and rubber. Combining these materials (plastic and rubber) gives an energy-efficient flat roofing system.
In recent times, TPO has risen to be one of the top commercial and even residential flat roofing materials of choice among homeowners, thanks in part to its remarkable degree of energy efficiency. According to the National Roofing Contractors Association (NRCA), TPO has a naturally reflective surface, making it one of the best flat roofing materials for reflecting UV rays.
While the cost varies, it will take about $3 to $7 per square foot, both in materials and labor, to successfully install a TPO roofing system.
Cost is one of the things you have to consider before embarking on any building project. For a TPO system, it costs less to install and maintain compared to other single-ply membrane roofing systems.
The TPO roofing system is the top choice for most homeowners and property managers because of its energy-saving nature. TPO coatings are mostly white, which means they can easily reflect UV rays, thereby lowering your utility bills.
If you’ve got your eyes fixed in the long run, you’ll discover that TPO is easily the smart choice for you. As this type of single-ply membrane roofing comes laminated, you need not worry about the growth of weeds or algae on your rooftop.
Like most other single-ply membrane roofing, TPO roofing allows you to choose from a vast range of alternatives to insulate your building.
TPO offers many choices on how you want it to be installed. You can opt to install it by attaching adhesives or fastening it directly to your roof deck or by heat welding.
Although TPO is inexpensive, with different products available in the market, it will be hard for you to get quality material, except if you’re an expert.
As there are several and different TPO products out there, so is their thickness. However, you should know that the thickness of the material is never a guarantee of quality.
TPO materials are usually laminated. One problem with this is that it introduces weak points that could lead to cracks, leaks, and deterioration over time.
TPO flat roofing materials are a great choice for commercial buildings. However, installing a TPO roofing membrane and repairs will always require the expertise of a professional flat roofer.
Get your TPO flat roofing system today. Reach out to Royal Roofing & Siding Long Island 70 Sunrise Highway #500 Valley Stream, New York 11581 (516) 252-3001, https://www.gafroofinglongisland.com/.
